|
NerfDude1138
|
 |
« on: December 21, 2009, 07:58:41 PM » |
|
The following was posted on NH first, I copied it and added to it. With the homemades contest in full swing some peeps might find this useful. Its a bit of a mess at the moment but when I get a minute I will format it all and clean it up:
+ Bow Parts:
2522A717 - General Purpose High-Speed Steel Hand Tap Plug, 6-32, H3 Pitch Diameter, 3 Flute = $3.48
85805K28 - Polycarbonate Sheet 1/4" Thick, 12" X 12", Clear
85805K26 - Polycarbonate Sheet 1/8" Thick, 12" X 12", Clear
8538K18 - Black Nylon 6/6 Rod 1/2" Diameter = $0.83 per foot (5 feet)
8585K43 - Polycarbonate Round Tube 1-1/2" OD, 1-3/8" ID, Clear
4880K314 - Std-Wall (Schedule 40) White PVC Pipe Fitting 1" X 1/2" Sz, Pipe End Male X Socket Fem, Hex Bushing
90131A104 - 1/2" Screw Size, 1-3/8" OD, 1/8" Thick Large-OD Extra-Thick Reinforced Rubber Washer
92510A700 - Aluminum Unthreaded Round Spacer 1/2" OD, 1/8" Length, #6 Screw Size
9637K26 - Continuous-Length Compression Spring Spring-Tempered Steel, 11" L, .844" OD, .08" Wire
9657K39 - Steel Compression Spring Music Wire, 1" L, 1/4" OD, .020" Wire Diameter
90309A154 - Zinc-Plated Brass Unthreaded Round Spacer 3/8" OD, 1/4" Length, #6 Screw Size
91780A125 - Aluminum Female Threaded Hex Standoff 1/4" Hex, 3/8" Length, 6-32 Screw Size
91780A131 - Aluminum Female Threaded Hex Standoff 1/4" Hex, 3/4" Length, 6-32 Screw Size
91780A337 - Aluminum Female Threaded Hex Standoff 1/4" Hex, 1-1/2" Length, 6-32 Screw Size
90402A144 - Zinc-Plated Steel Pan Head Phil Machine Screw External Washer, 6-32 Thread, 1/4" Length
90402A146 - Zinc-Plated Steel Pan Head Phil Machine Screw External Washer, 6-32 Thread, 3/8" Length
90295A075 - Nylon 6/6 Flat Washer #6 Screw Size, .140" ID, .313" OD, .057"-.067" Thk = $2.68 per Pack of 100
98637A155 - MIL Spec Alloy Steel Cup Point Set Screw Cadmium Plated, 6-32 Thrd, 3/8" Length, MS51963-24
90631A007 - Grade 2 Hex Nylon-Insert Locknut Zinc-Plated Steel, 6-32 Screw Sz, 5/16" W, 11/64" H
90272A159 - Zinc-Pltd Stl Pan Head Phillips Machine Screw 6-32 Thread, 2" Length
90272A155 - Zinc-Pltd Stl Pan Head Phillips Machine Screw 6-32 Thread, 1-1/4" Length
90272A151 - Zinc-Pltd Stl Pan Head Phillips Machine Screw 6-32 Thread, 3/4" Length
Aluminum Materials:
1658T49 - Architectural Aluminum Tube (Alloy 6063) 5/8" OD, .527" ID, 8' Length
Acrylic Materials:
85635K462 - Fluorescent Cast Acrylic Sheet .118" Thick, 12" X 12", Amber (Same as 85635K421)
Delrin Materials:
8573K13 - Delrin Sheet 1/8" Thick x 12" x 12", White
8573K15 - Delrin Sheet 1/4" Thick x 12" x 12", White
8627K57 - White Delrin Tube 5/8" OD X 1/2" ID, 5' Length
8573K14 - White Delrin Sheet 3/16" Thick, 12" X 12"
Nylon Materials:
8539K13 - Nylon 6/6 Sheet 1/8" Thick x 12" x 12", Off White
8539K15 - Nylon 6/6 Sheet 1/4" Thick x 12" x 12", Off White
2987K21 - FDA-Compliant Nylon Check Valve for 1/8" Tube ID, 1-5/16" End-to-End Length
CS Darts:
8771K2 1/2" Felt Stickers
91083A009 - #8-32 Washers
Bowler Dart Heads:
95495K121 1/2" Molded Domes
Useful Springs:
9637K26 - K26 Springs or +bow/SNAP Spring
9637K25 - K25 Springs
96565K36 - Useful Catch Springs
PETG:
9245K25 - PETG [Same I/D and O/D as 1/2" CPVC(1/2" ID and 5/8" OD)]
7528A13 - PETG Adhesive. Also Works on Butyrate, Acrylic, Polycarb, and Polystyrene.
Air Guns:
5229K58 - Air-Gun Tubing. 1/4" I/D and 3/8" O/D
5006K53 - Air-Gun Tubing. 1/8" ID 1/4" OD
7757K41 - Polypropylene Spring-Loaded Ball Check Valve Buna-N Seat, 1/8" Barb X 1/8" Barb (Same as 7757K11)
2987K21 - FDA-Compliant Nylon Check Valve for 1/8" Tube ID, 1-5/16" End-to-End Length
38105K31 - Miniature Gauge - 5% Full-Scale Accuracy 29/32" Dial, 1/8" NPT Center Back, 0 - 60 PSI (Same as 38105K51)
5121K511 - White Polypropylene Barbed Tube Fitting Adapter for 1/8" Tube ID X 1/8" NPT Female Pipe, Packs of 10
5121K941 - White Polypropylene Barbed Tube Fitting Branch Tee for 1/8" Tube X 1/8" NPT Male Pipe, Packs of 10
53415K143 - White Polypro Single-Barbed Tube Fitting Wye for 1/8" Tube ID, Packs of 10
Foam Backer Rod: (Note: This foam is known to be somewhat inconsistent):
77605T422 - 3/8" Foam Backer Rod
93295K43 - 1/2" Foam Backer Rod
77605T442 - 5/8" Foam Backer Rod
77605T462 - 7/8" Foam Backer Rod
Brass Materials:
50265K23 - Brass Adjustable-Pressure Pop-Safety Valve Multi Range, 1/4" NPT Male, 25-200 PSI
Hand Tools:
55095A33 - Maxi-Grip Screwdriver with Antislip Tip Phillips Round Blade, #1 Tip, 6" Long
Valves:
2987K21 - FDA-Compliant Nylon Check Valve for 1/8" Tube ID, 1-5/16" End-to-End Length
7757K41 - Polypropylene Spring-Loaded Ball Check Valve Buna-N Seat, 1/8" Barb X 1/8" Barb (Same as 7757K11)
misc stuff:
9245K25 Clear PETG Tube 5/8" OD, 1/2" ID, Lengths of 6 Ft.
2987K21 FDA-Compliant Nylon Check Valve for 1/8" Tube ID, 1-5/16" End-to-End Length
7757K41 Polypropylene Spring-Loaded Ball Check Valve Buna-N Seat, 1/8" Barb X 1/8" Barb (Same as 7757K11)
50265K23 Brass Adjustable-Pressure Pop-Safety Valve Multi Range, 1/4" NPT Male, 25-200 PSI
8627K57 White Delrin Tube 5/8" OD X 1/2" ID, 5' Length
8573K13 White Delrin Sheet 1/8" Thick, 12" X 12"
8573K14 White Delrin Sheet 3/16" Thick, 12" X 12"
55095A33 Maxi-Grip Screwdriver with Antislip Tip Phillips Round Blade, #1 Tip, 6" Long
1658T49 Architectural Aluminum Tube (Alloy 6063) 5/8" OD, .527" ID, 8' Length
38105K31 Miniature Gauge - 5% Full-Scale Accuracy 29/32" Dial, 1/8" NPT Center Back, 0 - 60 PSI (Same as 38105K51)
5121K511 White Polypropylene Barbed Tube Fitting Adapter for 1/8" Tube ID X 1/8" NPT Female Pipe, Packs of 10
5121K941 White Polypropylene Barbed Tube Fitting Branch Tee for 1/8" Tube X 1/8" NPT Male Pipe, Packs of 10
53415K143 White Polypro Single-Barbed Tube Fitting Wye for 1/8" Tube ID, Packs of 10
85635K462 Fluorescent Cast Acrylic Sheet .118" Thick, 12" X 12", Amber (Same as 85635K421)
more:
5006K533 - 1/8" ID, 1/4" OD vinyl tubing (fairly standard for our uses, it's all I use)
62475K11 - cheap DCV, VERY useful in semi-auto setups
51525K213, 51525K123 - cheapest way to make a quick disconnect coupler of sorts (female, male respectively)
And finally, ND's personal contribution to the list:
9657K149 Steel Compression Spring Znc-Pltd Spring-Tempered, 1" L, 1/4" OD, .029" Wire
(I use these in place of the catch spring on my +bows, stronger spring)
94135K17 Type 302 Stainless Steel Extension Spring 2-1/2" Length, 5/16" OD, .035" Wire Diameter
(I use these on my +bows for the trigger instead of a rubber band)
9637K19 Continuous-Length Compression Spring Spring-Tempered Stl, 11" L, 1.093" OD, .091" Wire
(similar to the AR springs in +bows, except bigger like a DT3 spring)
9245K29 Clear PETG Tube 3/4" OD, 5/8" ID
(use on Splitfires with brass inside - might be same material in Guru III, not positive)
9008K21 Multipurpose Aluminum (Alloy 6061) 3/8" Square, 6' Length
(If you have to replace an xbow plunger rod - might be same material in Guru III, not positive)
|
